1967 FORD MUSTANG Coupe PROJECT

1967 Ford Mustang Description:

1967 FORD MUSTANG Coupe
PROJECT
from
MustangBeginnings

If you have ever wanted a 67 Mustang Coupe project that was affordable, This is the car! It would make a great Father and Son or Daughter project.

We have the 6 cylinder engine for the car, or you could opt to replace it with a rebuilt ready to go 289 or 302 V-8 . You could probably get the original engine running, but it would still need rebuilding. Same for the carburetor and distributor. We would recommend swapping the original engine for a rebuilt engine that will get the car diving dependably much sooner. Call us if you need an engine or transmission, no problem we have most kinds, and rebuilt ones are available separately at very reasonable prices.
Not sure of the original color, probably white with black stripes, but you can paint it any color you like.

We have included some pictures of other Mustangs at the end of the photos below showing how the car might look when finished.

The 1967 Mustang brought buyers into the showrooms by the thousands and Ford’s strategy worked—selling more Mustangs than ever before.
When fully restored, this car will easily sell for $15,000 or more.

BODY:
The big dent in the driver’s side of the car is the biggest issue and will need to be replaced.We may have a quarter off of another 67 coupe. We will take a look tomorrow and add that information to this auction before the close of the auction. The roof will need rust repair along the drip rail and someone cut a piece out of the quarter. The rest of the body is in pretty good shape.The floors will need to be patched or replaced. Overall this Mustang is a great project.

INTERIOR:
The interior will need a little work, but not much, and it is really the easiest part of the restoration. The good news is that you can see what is needed. You aren’t accepting someone else’s mistakes or bad repairs.
All the wiring, instrument panel, seats, etc. will come with the car but will need to be restored.
Both seats will need to be reupholstored, and we can sell you anything you need for redoing the interior. The door panels and dash pad are included, but you will probably want new ones anyway.

ENGINE BAY:
Engine bay is in great condition. You should plan on having the engine rebuilt to accept modern unleaded gas, or as we recommended, upgrade to a 289 or 302. Either will drop right in, and the original engine can be used as a core.

Please contact us separately for recommendations on where to find the engine you want.

BRAKE SYSTEM:
The mustang has front and rear drum brakes. They are intact and complete. If you would rather have front disk brakes, we can add those for $1,500.

GLASS:
The windshield and door glass are included, but you will need a new rear window

MISC.
The Mustang comes with everything shown in the pictures, and most all of its parts. I have a couple of contacts for all the other NOS stuff you may need
At MustangBeginnings we are here to help you make your restoration a success..

WE HAVE 100% POSITIVE FEEDBACK AND PLAN TO KEEP IT THAT WAY! THERE ARE NO SURPRISES HERE, I ENCOURAGE ALL THOSE WHO BID TO COME SEE THE CAR FIRST IF POSSIBLE OR SEND SOMEONE HERE TO INSPECT IT. WE HAVE COMPLETED OTHER 67 MUSTANGS AND KNOW WHAT IT TAKES TO COMPLETE THIS CAR. THIS IS A GOOD CAR TO START WITH. PLEASE REMEMBER THIS IS A 67 MUSTANG THAT NEEDS TO BE REBUILT INTO SOMETHING SPECIAL.
AGAIN, WE STRONGLY ENCOURAGE ALL BIDDERS TO CHECK THE CAR OUT IF POSSIBLE THAT WAY THERE ARE NO MISUNDERSTANDING, MISTAKES, MISCOMMUNICATION, AND ALL THE OTHER MISES.
THE CAR MIGHT NEED THINGS WE DID NOT LIST BUT THE MAJOR ONES HAVE BEEN LISTED. WE PUT THE WORD “PROJECT” IN THE DESCRIPTION TO COVER ANYTHING WE MIGHT HAVE NOT SEEN. WE HAVE THE CAR FOR SALE LOCALLY AND RESERVE THE RIGHT TO END AUCTION EARLY.