Chevy C10 454, 700R4

1984 Chevrolet C-10 Description:

Motor and tranny rebuild, I put about 8000 miles on it since rebuild.

Engine is a 454 with brand new Procomp aluminum heads oval port and Procomp camshaft, steel roller rocker arms, air gap intake, Holley carburetor 750 cfm vacuum secondary with electric chocke, Hedman headers, aluminum valve covers, all bearing and gaskets are replaced, racing air filter, new polished aluminum water pump and thermostat, 3 row aluminum racing radiator, Holley electric fuel pump, brand new a/c compressor and dryer system flushed and charged, cold air.

Transmission 700r4 is rebuild, monster sunshell, new torque converter 2800 stall, drilled separator plate for firm shift points, corvette governor and corvette servo, transmission oil cooler, bigger boost valve.

Axle is rebuild with a GM posi track and a brand new 3.73 gear ratio.

All shocks are new and in the back it got some shocks with air support.

22 inch wheels 9 inch wide in the front and 11 inch in the back.

Switched the brakes in the back from drum to disc, new portioning valve for disc/disc and new master cylinder. All rotors and brake pads are new, Brake calipers are painted red and new, all brake hoses are replaced. Axle flip, frame is C notched, front lowered with different springs.

I put about 8000 miles on it since the rebuild. The odometer shows 23xxx miles.

I got a box full receipt of all the parts I bought for the build and the receipt from the machine for the work on the engine.

The truck is rock solid, only 2 spots of little rust shown on the 2 pictures.